Kids Helmet Full Face CGM 265A LUCKY MONO matt black
Article information
CGM 265A LUCKY MONO
The 265 LUCKY is the full-face helmet for young motorcyclists. It is a lightweight helmet with sizes that take into account the shape of the skull of the youngest, it is also characterized by attractive stickers for a safe and fun protection of the young motorcyclist. It is equipped with a long, anti-scratch, quick-release tilting visor and the Air Stream System ventilation with three inner channeling zones. The hexagonal, thermoformed, removable interior offers more comfort, it also has the ExtraCool fabric with contrasting stitching. It is completed by the nose deflector, the chin deflector and the elastic strap buckle.
Scratch resistant paint
Each shell, after being smoothed, is given several layers of varnish. The outer shell is then coated with a transparent, scratch-resistant varnish. This makes the helmet less prone to damage.Polycarbonate shell
A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.Large surface Visor
In order to have an even better view of the road, the visor is equipped with a larger surface. This gives the driver a better view of the traffic from the side. This enhances comfort and safety while riding.Removable inner lining
The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.Nose deflector
The nose deflector prevents warm air from blowing against the visor. This avoids condensation on the visor, which can reduce visibility. Alternatively, a Pinlock visor can be fitted on the helmet.Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.Standard inner lining
Simple inner lining that fits well around the user's head. The inner lining is made of a soft material that prevents discomfort while riding. In general, this lining is found in the cheaper helmets.Quick release visor
With a quick release visor, the visor can be removed easily and quickly. No tools are needed. To remove the visor, 2 buttons must be pressed on both sides of the baseplate on the helmet.Removable cheek pads
In addition to the inner lining, the cheek pads can also be removed. These are attached with velcro or several press-studs. Washing the cheek pads with neutral soap will keep them fresh. Make sure that the cheek pads are dry when they are put back into the helmet.Sizes YS-YM-YL-YXL
The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.Click here to determine your helmet size.
Titling visor fastening system
The tilting fastening system presses the visor even more firmly against the rubber rim of the helmet. In this way, the visor closes optimally. This will not only prevent the cold but also makes the helmet more silent. It is important to lubricate the rubber edge with a little silicone to prevent it from dehydrating.ECE-R 22.06 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.Extracool Inner Lining
The extracool inner linings are made with a new breathable fabric with an innovative design.Air stream system
This helmet is equipped with front air vents which allows the fresh air inlet that, passing through the proper ducting in the inner shell, arrives to the rider, helping to keep fresh and oxygenated the inside of the helmet.Elastic fabric loop
Elasticated fabric loop that allows you to lock the excess strap in the folded position.Specifications
Size | : | Kids M 49-50cm |
Type | : | Children's helmet |
Color | : | Black |
Fits
Kids Helmet Full Face CGM 265A LUCKY MONO matt black fits the following vehicles:Documentation
Manual_Instruction_265.pd...
Recommended products
Spare parts