Article information
CGM 261A MINI MONO
If you want to find a fun and safe Demi Jet helmet for your child, CGM has what you need. Thanks to a wide range of Demi Jet helmets, we offer you this CGM 261A MINI MONO children's Demi Jet helmet, which will satisfy you and your child will love it.
Features:
Who says a YOUNG helmet can't be fun and safe? Made with a specially designed shell with 5 sizes for different age ranges, from children to teens, the 261 is a lightweight demi jet with a wraparound fit. Characterized by removable and washable colored interiors combined with a neck collar with removable zippered cheek pads. The helmet is equipped with a complete AIR STREAM SYSTEM ventilation system and a long visor that provides better protection against the wind. The micrometric buckle, the anti-theft ring and the elastic to block the excess strap complete the equipment. Inside the package there is a sheet of stickers, made with a specific adhesive suitable for being applied to the shell of the helmet, allowing the helmet to be personalized with emoticons and letters of the alphabet.
Size information:
YXS-47cm
YS 48 cm
JM 49-50 cm
YL 51-52cm
YXL 53-54cm
Scratch resistant paint
Each shell, after being smoothed, is given several layers of varnish. The outer shell is then coated with a transparent, scratch-resistant varnish. This makes the helmet less prone to damage.
Long Visor with anti-scratch treatment
The visor can be damaged during use. The small scratches can reduce visibility on sunny days. The anti-scratch coating makes the visor less prone to damage. However, do not let sharp objects such as jewellery or keys come into contact with the visor. Because of the coating, the visor should only be cleaned with water and dish soap. Use of strong detergents can damage the coating.
Removable inner lining
The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.
Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.
Anti-theft ring
The chin strap of the helmet is equipped with a metal ring. By using this ring, the helmet can be attached to the hook under the saddle. In this way, theft is prevented.
Removable cheek pads
In addition to the inner lining, the cheek pads can also be removed. These are attached with velcro or several press-studs. Washing the cheek pads with neutral soap will keep them fresh. Make sure that the cheek pads are dry when they are put back into the helmet.
Removable collar part
The helmet is equipped with an additional collar that is attached to the inner shell with a zip or velcro. The collar provides extra comfort and protection against the cold in the winter. If the collar is no longer used, it can easily be removed.
Removable chin protector
The chin guard must ensure that the chin strap does not come in contact with the neck. This can cause an irritated feeling. The chin guard can be removed and washed if necessary.
Average weight size M +/-950gr
The weight of the helmet depends on the type of helmet. A jet-helmet is generally lighter than a system helmet. Glass fibre is also lighter than polycarbonate. The helmet is often measured in size M without visor. The second number on the sticker at the back of the helmet indicates the weight of the visor.
ECE-R 22.06 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.
Air stream system
This helmet is equipped with front air vents which allows the fresh air inlet that, passing through the proper ducting in the inner shell, arrives to the rider, helping to keep fresh and oxygenated the inside of the helmet.
Elastic fabric loop
Elasticated fabric loop that allows you to lock the excess strap in the folded position.
HPT shell
The shell is injection molded, the thermoplastic polymers, once cooled and hardened after the molding process, guarantee a high mechanical resistance for maximum impact protection, in a wide range of temperatures, and a high capacity to dissipate energy resulting from an impact. Furthermore, the molded shell maintains its original structure, without deformation or instability, for many years.Part number: CGM Helmets 261A-ALA-71_YA
Manufacturer: CGM Helmets, Zona Industriale Aversa Nord, 81030, Gricignano di Aversa (CE), Italia, www.cgmitalia.net
Specifications
| Type | : | Children's helmet |
| Color | : | Fuchsia |
| Collection | : | 261 MINI |
Fits
Kids Helmet Jet CGM Moto 261A MINI MONO Fucsia fits the following vehicles:Documentation
Instruction_Manual_261.pd...
Additional products
Recommended products
Spare parts
Recently viewed articles
