ECU MALOSSI DIGITRONIC Derbi/ Piaggio 50 2T E4 2018->
Article information
Malossi is proud to offer its new Digitronic ECU with variable ignition timing!
Compared to the original ECU, Malossi has completely modified the ignition timing performance maps and increased the rev limit to 15,000 RPM.
The new Digitronic controls the ignition timing and SAS valve.
Ignition Timing Performance Map
The ignition timing is controlled by performing a linear interpolation of a tri-dimensional performance map, containing 16 break points for engine speed and 8 break points for engine temperature.
SAS Valve Performance Map
The secondary air supply to the base of the throttle body enables the engine management system to compensate for the non-linearity typical in carburettor systems.
The SAS Valve (Secondary Air Source) is controlled by the ECU which performs a linear interpolation of a performance map, containing 16 break points for engine speed and 8 break points for engine temperature.
The SAS Valve reduces emissions and optimizes engine performance for all operating conditions.
Designed to be plug & play, in other words compatible with the original sensors and actuators.
The calibrations and fine-tuning allow for a definite increase in engine performance.
Timing adjusting
RPM limiter : 15,000 RPM
Specifications
Part number Malossi | : | 5518206B |
Part | : | Digitronic |
Fits
ECU MALOSSI DIGITRONIC Derbi/ Piaggio 50 2T E4 2018-> fits the following vehicles:- Aprilia RS4 50 H2O 2T E4 2018-2020 (D50B0)
- Aprilia RX 50 Enduro H2O 2T E4 2018-2020 (D50B0)
- Aprilia SX 50 SM H2O 2T E4 2018-2020 (D50B0)
- Derbi Senda R 50 X-Treme H2O 2T E4 2018-2020 (D50B0)
- Derbi Senda SM 50 DRD Racing H2O 2T E4 2018-2020 (D50B0)
- Derbi Senda SM 50 X-Treme H2O 2T E4 2018-2020 (D50B0)
- Gilera RCR 50 H2O 2T E4 2018-2020 (D50B0)
- Gilera SMT 50 H2O 2T E4 2018-2020 (D50B0)
Documentation
7318130.pdf
Additional products
Recommended products