ECU MALOSSI DIGITRONIC Piaggio NRG Power 50 2T E4 2018->
Article information
Malossi is proud to offer its new Digitronic ECU with variable ignition timing!
Compared to the original ECU, Malossi has completely modified the ignition timing performance maps and increased the rev limit to 15,000 RPMs.
The new Digitronic controls the ignition timing and SAS valve.
Ignition Timing Performance Map
The ignition timing is controlled by performing a linear interpolation of a tri-dimensional performance map, containing 16 break points for engine speed and 8 break points for engine temperature.
SAS Valve Performance Map
The secondary air supply to the base of the throttle body enables the engine management system to compensate for the non-linearity typical in carburettor systems.
The SAS Valve (Secondary Air Source) is controlled by the ECU which performs a linear interpolation of a performance map, containing 16 break points for engine speed and 8 break points for engine temperature.
The SAS Valve reduces emissions and optimizes engine performance for all operating conditions.
Designed to be plug & play, in other words compatible with the original sensors and actuators
The calibrations and fine-tuning allow for a definite increase in engine performance.
Timing adjusting
RPM limiter : 15,000 RPM
Malossi recommends the use of a Malossi Wild Lion or Flip exhaust system (or comparable), in order to obtain the best performance. It is then necessary to replace the main jet 58 with 65, also removing the intake diaphragm present in the carburetor.
Mounting the control unit does not require any modification to the engine and transmission. We recommend mounting the hub without limiter, or the Multivar variator, art. 519019 (see recommended products.
Specifications
Part number Malossi | : | 5518235B |
Part | : | Digitronic |
Fits
ECU MALOSSI DIGITRONIC Piaggio NRG Power 50 2T E4 2018-> fits the following vehicles:Documentation
7318130.pdf
Additional products
Recommended products