Spray Can DUPLICOLOR Acryl High Gloss Ral 4005 Blue Lilac 400 ml
Article information
Attention : The image is just a reference. The color on the image
can be different from the actual RAL color.
High quality lacquer with color-match according to RAL color system. Fast and hard drying, polish-able, weather- and light-proof for perfect paint repair inside and outside. Applicable on metal, wood, glass, stone, ceramics, carton and coat-able plastics. Instructions : Remove dust, grease and dirt from surface. Mask off areas not to be painted. Protect surroundings from spray mist. Shake can for 3 minutes. Test spray. (Check compatibility with base coat at a hidden area). Spraying distance approx. 25 cm (10 inch). Apply several light coats. Dust-dry after 10 minutes, fully hardened after approx. 24 hours. Not to be applied on synthetic resin paint. For plastic parts use MOTIP plastic primer.
Specifications
Part number Motip | : | 366109 |
Type | : | Spray can |
Color | : | Blue |
Fits
Spray Can DUPLICOLOR Acryl High Gloss Ral 4005 Blue Lilac 400 ml fits the following vehicles:Documentation
Duplicolor_Acryl_-_FR.pdf
Duplicolor_Acryl_-_IT.pdf
Duplicolor_Acryl_-_ES.pdf
Duplicolor_Acryl_-_EN.pdf
Duplicolor_Acryl_-_NL.pdf
Duplicolor_Acryl_-_DE.pdf
Safety information
Signal word:
Pictograms:
Flammable
Harmful
Hazard statements:
Precautionary statements:
Recommended products
Return of packaging material
We are legally obliged to take back the following packaging materials from end consumers and in particular from private households free of charge:
- Transport packaging (packaging which facilitates the handling and transport of goods in such a way to avoid their direct contact and damage during transport, and which is not typically intended for transfer to the final consumer - such as pallets, foils, cardboard boxes for groupage etc.)
- Sales and secondary packaging which, after use, does not typically result in waste from private end-users (especially bulk packaging)
- sales and secondary packaging for which a systematic disposal is not possible due to pollutant and/or health risks during recycling; and
- Sales packaging of hazardous products (plant protection products, oils, liquid fuels and other oil-borne products and mixtures of diphenylmethane-4-4,-diisocyanate)
We will also take back packaging material collected during delivery of the products free of charge.
Because this packaging material cannot be involved in a dual disposal system, we ensure the return of the material to an orderly recycling cycle by taking it back.
Final consumers may hand over the packaging material resulting from the delivery to the delivering company at the actual place of delivery.