Chain Spray YAMAHA Yamalube® 56ml
Article information
A chain lives a tough, dangerous and extremely stressful life, even when it’s kept clean! So every improvement we make in lube technology is geared to add more life to it, and remember, a clean, well-lubricated chain is a smoother-running chain! It’s not all about protection against wear though – these days we place great importance on the ‘throw-off’ behaviour of the lubricant and in this Yamalube spray is a formula that’s hard to beat.
-Extreme adhesion
-Longer application intervals
-Significantly extended chain life
-Practically impossible to throw off
-Excellent penetration
-Optimum lubricating properties from -30 °C to +110 °C
-Effectively protects against rust
-Highly resistant against washing off (driving through rain, cycle washes)
-Contains PTFE
-Protects 0/X/Z rings and keeps them supple
-Significantly extends chain life and keeps O/Z/X rings supple
-Contains PTFE and other additives for increased resistance to wear and rust
-Highly resistant to throwing or washing off, even in extreme conditions
-Suitable for fast-running drive chains under high stress, on or off-road
-Optimum lubricating properties all the way from -30ºC to +110ºC
-For the best results, start the job with Yamalube Chain Cleaning Spray
Specifications
| Part | : | Sprays |
Fits
Chain Spray YAMAHA Yamalube® 56ml fits the following vehicles:Documentation
YMD65049A021-EN.pdf
YMD65049A021-NL.pdf
YMD65049A021-DE.pdf
YMD65049A021-FR.pdf
YMD65049A021-IT.pdf
YMD65049A021-ES.pdf
Safety information
Return of packaging material
We are legally obliged to take back the following packaging materials from end consumers and in particular from private households free of charge:
- Transport packaging (packaging which facilitates the handling and transport of goods in such a way to avoid their direct contact and damage during transport, and which is not typically intended for transfer to the final consumer - such as pallets, foils, cardboard boxes for groupage etc.)
- Sales and secondary packaging which, after use, does not typically result in waste from private end-users (especially bulk packaging)
- sales and secondary packaging for which a systematic disposal is not possible due to pollutant and/or health risks during recycling; and
- Sales packaging of hazardous products (plant protection products, oils, liquid fuels and other oil-borne products and mixtures of diphenylmethane-4-4,-diisocyanate)
We will also take back packaging material collected during delivery of the products free of charge.
Because this packaging material cannot be involved in a dual disposal system, we ensure the return of the material to an orderly recycling cycle by taking it back.
Final consumers may hand over the packaging material resulting from the delivery to the delivering company at the actual place of delivery.
