Home Accessories Equipment and outfit Helmets

Helmet Demi Jet CGM 169A ILLI MONO black (double visor)

Price:

105,00 €

Tax free, excl. shipping

Size:

Number:

Stock:

Size XS		Directly from stock
Size S		Directly from stock
Size M		Directly from stock
Size L		Directly from stock
Size XL		Directly from stock

What helmet size do I have?

Customers value EasyParts with a 9.4/10
Knowledgeable and responsive customer service
Fast shipping with UPS
Safe payment with SSL/https
Easy and customer-friendly returns

Article information

CGM 169A ILLI MONO
Demijet equipped with a long external visor that extends up to cover the chin, with predisposition for PINLOCK lens. It is equipped with hidden extra-smoked inner visor adjusted through the rotation of the left plate of the helmet. It is also equipped with an AIR STREAM SYSTEM aeration system made by resealable front air vents, inner shell's air ducts and rear extractors. The inner linings, which are pierced, removable and washable, are also made with a hexagonal thermoformed top, studied for a more comfortable fitting, and with an EXTRACOOL fabric, extremely soft on contact with the skin. Finally, they're also enriched by rear reflective bands or high visibility yellow fluo bands to improve passive safety.

Scratch resistant paint

Each shell, after being smoothed, is given several layers of varnish. The outer shell is then coated with a transparent, scratch-resistant varnish. This makes the helmet less prone to damage.

Polycarbonate shell

A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.

Long Visor with anti-scratch treatment

The visor can be damaged during use. The small scratches can reduce visibility on sunny days. The anti-scratch coating makes the visor less prone to damage. However, do not let sharp objects such as jewellery or keys come into contact with the visor. Because of the coating, the visor should only be cleaned with water and dish soap. Use of strong detergents can damage the coating.

Integrated sun visor

The integrated sun visor is easy to use. By pulling the lever of the visor, the visor comes down. This way, you don't have to wear sunglasses on sunny days. The sun visor blocks most of the sun's rays and can be combined with sunglasses. When it gets too dark, you can easily pull the visor up again and use the transparent visor.

Luxury inner lining

The inner lining is more luxurious compared to the standard lining. The lining is made of refined materials and has a luxurious look. The colours of the lining match the exterior of the helmet. The luxury lining can often be found on the more expensive helmets.

Removable inner lining

The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.

Micrometric buckle

The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.

Anti-theft ring

The chin strap of the helmet is equipped with a metal ring. By using this ring, the helmet can be attached to the hook under the saddle. In this way, theft is prevented.

Average weight size M +/-1250gr

The weight of the helmet depends on the type of helmet. A jet-helmet is generally lighter than a system helmet. Glass fibre is also lighter than polycarbonate. The helmet is often measured in size M without visor. The second number on the sticker at the back of the helmet indicates the weight of the visor.

Sizes XS-S-M-L-XL

The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.
Click here to determine your helmet size.

Pinlock prepared

If a visor is prepared for Pinlock, you can recognize this by special pins on the side of the visor. Between these pins an extra visor can be placed which prevents the visor from fogging up. When it is cold outside and warm inside the helmet, condensation can appear. The Pinlock visor ensures that vision is maintained. The Pinlock visor can be left on when the helmet is not in use.

ECE-R 22.06 certification

If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.

Extracool Inner Lining

The extracool inner linings are made with a new breathable fabric with an innovative design.

Air stream system

This helmet is equipped with front air vents which allows the fresh air inlet that, passing through the proper ducting in the inner shell, arrives to the rider, helping to keep fresh and oxygenated the inside of the helmet.

High visibility inner lining

The high visibility inner linings are made with inserts or bands in reflective material or in fluo yellow to make the helmet more visible, increasing passive safety.