Helmet Demi Jet VESPA Visor BT (Bluetooth) mat grey G22 OP
Article information
Demi-jet helmet made of ABS material finished with eco-stitched leather on edge & 2mm transparent visor with anti scratch treatment and double screw set (aluminum & yellow). Homologated bluetooth headset integrated in the shell, with customized Vespa rubber microphone. Engraved Vespa Logo on the back of the shell. Micrometric retention system with antitheft ring. Better fit: more embracing innovative breathable interior made of 3D fabric. New customized inner lining. ECE 22.05 homologation. Made in ITALY.
Bluetooth system:
-Stereo headset.
-Double link function, listen to music and receive GPS instructions simultaneously.
-Driver-to-passenger intercom.
-Integrated microphone with micro USB port.
-Unique intuitive button on the microphone.
-Red / blue led on the microphone that indicates the status of the system.
-Call answering function using voice command.
Scratch resistant paint
Each shell, after being smoothed, is given several layers of varnish. The outer shell is then coated with a transparent, scratch-resistant varnish. This makes the helmet less prone to damage.
Polycarbonate shell
A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.
Perimetrical rim
The outer shell is finished with a plastic rim. This not only provides a neat finish but also offers protection to the outer shell. If the helmet is dropped on the ground, it is not immediately damaged.
Perforated inner lining
The ventilation system in the helmet ensures a constant air flow. Through the perforated inner lining, this air, which enters through the air channels, can also reach the skin. This way it always stays cool inside the helmet. In winter, the ventilation system can be closed so no air enters the helmet.
Extra soft inner lining
By using softer materials compared to the standard lining, the helmet provides even more comfort. During a long ride, the soft lining is absolutely noticeable.
Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.
Anti-theft ring
The chin strap of the helmet is equipped with a metal ring. By using this ring, the helmet can be attached to the hook under the saddle. In this way, theft is prevented.
Removable chin protector
The chin guard must ensure that the chin strap does not come in contact with the neck. This can cause an irritated feeling. The chin guard can be removed and washed if necessary.
Sizes XS-S-M-L-XL
The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.Click here to determine your helmet size.
ECE 22-05 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.Specifications
| Bluetooth | : | Yes |
| Size | : | XS / 53-54cm |
| Type | : | Demi Jet |
| Color | : | Grey |
| Collection | : | Visor |
Fits
Helmet Demi Jet VESPA Visor BT (Bluetooth) mat grey G22 OP fits the following vehicles:Documentation
Vespa_Visor_BT_Helmet.pdf
Caractéristiques_Visor_Bl...
Vespa_Visor_BT_Bluetooth_...
Recommended products
Spare parts
|
No spare parts where found. |
