Helmet Jet VESPA Elettrica Tech Chrome/ Copper Bluetooth Communication

Article information

• ABS Jet shell helmet
• 2 colors available: Silver-Light Blue; Silver-Copper (2019)
• Shell edge in same materials of the vehicle finiture
• Hypoallergenic Inner in premium lining
• Micrometric retention system
• Exclusive BT System integrated in the shell
• ECE 22.05 homologation
• Compatible with dedicated goggles
• 2 earphones. Stereo.
• Possibility to listen to music and follow GPS instructions.
• Driver-to-passenger intercom with coupling to other
devices.
• Integrated microphone with micro USB port.
• Prepared for Bluetooth connection to enabled phones.
• Double-link function: in addition to the mobile phone,
another sound-emitting device can be connected via
Bluetooth.
• All electronic components are integrated within the headset.
• Unique intuitive button located on the microphone.
• Red / blue LED light indicating the status of the device
placed on the microphone.
• Call answering function using only the voice command.

Polycarbonate shell

A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.

Perimetrical rim

The outer shell is finished with a plastic rim. This not only provides a neat finish but also offers protection to the outer shell. If the helmet is dropped on the ground, it is not immediately damaged.

Luxury inner lining

The inner lining is more luxurious compared to the standard lining. The lining is made of refined materials and has a luxurious look. The colours of the lining match the exterior of the helmet. The luxury lining can often be found on the more expensive helmets.

Extra soft inner lining

By using softer materials compared to the standard lining, the helmet provides even more comfort. During a long ride, the soft lining is absolutely noticeable.

Micrometric buckle

The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.

Goggles fixation

On the back of the helmet, there is a leather strap with a press stud. The elastic of the helmet goggles can be threaded through here. In this way, the elastic strap stays on the helmet while riding.

Sizes XS-S-M-L-XL

The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.
Click here to determine your helmet size.

Built-in Bluetooth system

Equipped with a stereo headset and integrated microphone. Ability to listen to music and receive GPS instructions at the same time. Intercom function to communicate with your passenger. Available for IOS & Android.

ECE 22-05 certification

If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.