Modular helmet CGM 560C MAD PRO Carbon matt black (double visor)
Article information
CGM 560C MAD PRO CARBON
Designed to offer you an outstanding experience on the road, the 560 MAD is the new CGM's top of the range flip-up. With two measures of outer shell realized in HD COMPOSITE FIBERGLASS or in CARBON (MAD PRO version), which guarantee maximum safety with the minimum weight. It combines style, comfort and performance into one flip-up that is full of technology and solutions thought to make the trip pure emotion. It is equipped with a visor with anti-scratches treatment, tilting, with a lock in closed position and aerodynamic upper profile, along with the hidden sun visor. The visor is prepared to place the Pinlock lenses, the 100% MAX VISION PINLOCK 70 is included in the packaging. The 560 is provided with the AIR STREAM SYSTEM with 2 areas of air ducts inbound and 1 air duct outbound. The double homologation P/J allows the wearer to drive in perfect safety with both the helmet open and closed. The linings of the helmet are removable, hexagonal thermoformed for the best fitting comfort, they're realized in ExtraCool fabric and equipped with high visibility bands. The inner padding is realized with a specific fit for the glasses temples and with intercom predisposition. The chin and neck deflectors block the air from getting into the helmet, by increasing the stability and quietness. The equipment is completed by the nose deflector, the metal micrometric buckle and the elastic strap loop. CARBON: average weight small shell 1450gr, average weight big shell 1500gr. HD COMPOSITE FIBERGLASS: average weight small shell 1500gr, average weight big shell 1550gr.
Scratch resistant paint
Each shell, after being smoothed, is given several layers of varnish. The outer shell is then coated with a transparent, scratch-resistant varnish. This makes the helmet less prone to damage.
Long Visor with anti-scratch treatment
The visor can be damaged during use. The small scratches can reduce visibility on sunny days. The anti-scratch coating makes the visor less prone to damage. However, do not let sharp objects such as jewellery or keys come into contact with the visor. Because of the coating, the visor should only be cleaned with water and dish soap. Use of strong detergents can damage the coating.
Integrated sun visor
The integrated sun visor is easy to use. By pulling the lever of the visor, the visor comes down. This way, you don't have to wear sunglasses on sunny days. The sun visor blocks most of the sun's rays and can be combined with sunglasses. When it gets too dark, you can easily pull the visor up again and use the transparent visor.
Luxury inner lining
The inner lining is more luxurious compared to the standard lining. The lining is made of refined materials and has a luxurious look. The colours of the lining match the exterior of the helmet. The luxury lining can often be found on the more expensive helmets.
Removable inner lining
The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.
Nose deflector
The nose deflector prevents warm air from blowing against the visor. This avoids condensation on the visor, which can reduce visibility. Alternatively, a Pinlock visor can be fitted on the helmet.
Chin deflector
By using the chin deflector, the space under the chin is closed off. In this way the helmet will be more silent and the stability will be improved. A chin deflector is only possible in a system or full-face helmet.
Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.
Quick release visor
With a quick release visor, the visor can be removed easily and quickly. No tools are needed. To remove the visor, 2 buttons must be pressed on both sides of the baseplate on the helmet.
Average weight size M +/-1450gr
The weight of the helmet depends on the type of helmet. A jet-helmet is generally lighter than a system helmet. Glass fibre is also lighter than polycarbonate. The helmet is often measured in size M without visor. The second number on the sticker at the back of the helmet indicates the weight of the visor.
Different shell sizes
By using different helmet shells the helmets get an even better fit. The smaller helmet shells are used for the smaller sizes and the larger helmet shells for the larger sizes. In this way, size XS has a smaller helmet shell than size XXL.
Pinlock prepared
If a visor is prepared for Pinlock, you can recognize this by special pins on the side of the visor. Between these pins an extra visor can be placed which prevents the visor from fogging up. When it is cold outside and warm inside the helmet, condensation can appear. The Pinlock visor ensures that vision is maintained. The Pinlock visor can be left on when the helmet is not in use.
Titling visor fastening system
The tilting fastening system presses the visor even more firmly against the rubber rim of the helmet. In this way, the visor closes optimally. This will not only prevent the cold but also makes the helmet more silent. It is important to lubricate the rubber edge with a little silicone to prevent it from dehydrating.
P/J certification
All helmets have an approval label. This label contains a series of numbers starting with a letter, followed by a number of digits. The letters consist of J, P or NP. The J stands for Jet Helmet, P, for Protected and NP for Not Protected. With the letters NP on the inspection label, you have an unapproved helmet. This means that you are not insured in case of an accident.
Modular helmet
A modular is a helmet in which the chin can be folded upwards. The big difference is that you can ride with an open face helmet. In addition, you can keep the helmet on when you want to communicate with your passenger. Modular helmets are often used in the city.
Intercom ready
This helmet is designed to accommodate a Bluetooth communication system or intercoms. Allows you to install a communication system without changing the helmet itself. The preparation of the communication system or intercom does not compromise in any way the safety of the helmet. The helmet has a housing provided for headphones and a mounting is available to keep the microphone rod ready to use
ECE-R 22.06 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.
Extracool Inner Lining
The extracool inner linings are made with a new breathable fabric with an innovative design.
Air stream system
This helmet is equipped with front air vents which allows the fresh air inlet that, passing through the proper ducting in the inner shell, arrives to the rider, helping to keep fresh and oxygenated the inside of the helmet.
High visibility inner lining
The high visibility inner linings are made with inserts or bands in reflective material or in fluo yellow to make the helmet more visible, increasing passive safety.
Elastic fabric loop
Elasticated fabric loop that allows you to lock the excess strap in the folded position.
Prepared for glasses use
The internal padding is made with a special housing for the temples of the glasses, this system is designed to offer optimal comfort to those who wear glasses.
Neck deflector
It is a fabric protection positioned along the perimeter of the neck which prevents the entry of air inside the helmet, increasing its silence and stability.
100% max vision pinlock 70 lens included
The visor has special pegs for inserting the Pinlock® 70 Max Vision lens against visor fogging, included in the package. Max Vision technology provides a clear view for the entire view of the visor. A perfect fit for the daily commute.Specifications
| Size | : | XS / 53-54cm |
| Type | : | System |
| Color | : | Black |
| Material | : | Carbon |
| Pinlock | : | Yes |
Fits
Modular helmet CGM 560C MAD PRO Carbon matt black (double visor) fits the following vehicles:Recommended products
Spare parts
