Petrol System Cleaner SYSTAC (E10 additive)
Article information
With Systac Petrol System Cleaner scooter engines can run on E10 petrol without problems.
Systac Petrol System Cleaner is a specially formulated product that effectively cleans and maintains the entire gasoline / fuel system of combustion engines. It also removes contamination caused by the combustion in the combustion room and ensures the optimal functioning of lambda sensors and catalysts. It is safe for the most recent exhaust gas after-treatment systems.
Advantages of the product:
When used as instructed, Systac Petrol System Cleaner provides the following benefits:
• The product cleans the entire fuel system: the tank, the fuel tap, the carburettor (s) and the entire injection system.
• The product is completely miscible and harmless for gasoline with bioethanol up to and including E20.
• The product dissolves tar, varnish and paint in the fuel system and removes deposits on nozzles, dosing openings and injector needles.
• Neutralizes acidification caused by aging and oxidation of gasoline.
• Prevents corrosion in the tank and fuel system.
• Cleans the combustion chamber and piston base during use.
• Can, through improved mixture preparation, reduce fuel consumption and improve gas response.
• Ensures optimum combustion and operation of the exhaust gas after-treatment system, thereby reducing harmful emissions.
User instructions:
• For maintenance use every 1500 km: 1 dose of 200 ml is sufficient for 7 to 10 litre of fuel.
• In the event of serious contamination: Use 1 dose per 5L - 15 litre of fuel, make a test drive of at least 30 minutes and ensure that the engine is at the correct temperature.
• In the event of a system error: Make sure the engine is at the right temperature and run the engine undiluted on Systac Petrol System Cleaner. (flushing tank with any pressure device) Add a dose of Systac Petrol System Cleaner to the tank capacity and make a test drive of at least 25 km.
Specifications
| Part | : | Cleaners |
Fits
Petrol System Cleaner SYSTAC (E10 additive) fits the following vehicles:Documentation
SYS-PSC-90005_SystacPetro...
SYS-PSC-90005_SystacPetro...
Safety information
Signal word:
Pictograms:
Flammable
Harmful
Health hazard
Hazard statements:
Precautionary statements:
Return of packaging material
We are legally obliged to take back the following packaging materials from end consumers and in particular from private households free of charge:
- Transport packaging (packaging which facilitates the handling and transport of goods in such a way to avoid their direct contact and damage during transport, and which is not typically intended for transfer to the final consumer - such as pallets, foils, cardboard boxes for groupage etc.)
- Sales and secondary packaging which, after use, does not typically result in waste from private end-users (especially bulk packaging)
- sales and secondary packaging for which a systematic disposal is not possible due to pollutant and/or health risks during recycling; and
- Sales packaging of hazardous products (plant protection products, oils, liquid fuels and other oil-borne products and mixtures of diphenylmethane-4-4,-diisocyanate)
We will also take back packaging material collected during delivery of the products free of charge.
Because this packaging material cannot be involved in a dual disposal system, we ensure the return of the material to an orderly recycling cycle by taking it back.
Final consumers may hand over the packaging material resulting from the delivery to the delivering company at the actual place of delivery.
