Clutch bell MALOSSI Maxi Wing Yamaha X-Max 300i E4 Ø150
Article information
Clutch Bell with Reinforced Cooling Ring
The clutch bells with reinforced cooling ring consist of a finned annular reinforcement producing excellent heat dissipation caused primarily from stand still starts and quick accelerations from low speeds.
This technological innovation resulted from extensive testing within the Scooter racing circuit.
The clutch bell design is based on the following principals:
greater heat transfer surface area (finned section) lowers the working temperature of the clutch bell which dramatically increases the systems durability.
The clutch system is enormously stressed in city street riding, starts uphill and tight turn exits with a passenger.
That is why Malossi has fine tuned the Maxi Wing Clutch Bell to protect your clutch.
We must not discard the fact that the finned reinforcement ring is also a safeguard against failure. It has been designed to resist the elevated centrifugal forces due to large rotational speeds generated by high performance engines. Keep in mind that centrifugal force increases by the square of the rotational speed.
TECHNICAL SPECIFICATIONS
Bell housing made of ductile steel and deep drawn;
Spline hub made of special steel, machined, welded and broached;
Frictional working surface machined to tight tolerances;
Dynamically balanced;
Nitride surface hardened.
Specifications
Part number Malossi | : | 7717853B |
Type | : | Mid-race |
Class | : | Maxi Wing Clutch Bell |
Diameter | : | 150mm |
Fits
Clutch bell MALOSSI Maxi Wing Yamaha X-Max 300i E4 Ø150 fits the following vehicles:- MBK Evolis II ABS 300i H2O 4T E4 2017-2018
- Yamaha Tricity 300i H2O 4T E4 2020
- Yamaha Tricity 300i H2O 4T E5 2021->
- Yamaha X-Max IV ABS 250i H2O 4T E4 2018-2020
- Yamaha X-Max IV ABS 250i H2O 4T E5 2021-2022
- Yamaha X-Max IV ABS 300i H2O 4T E4 2017-2020
- Yamaha X-Max IV ABS 300i H2O 4T E5 2021-2022
- Yamaha X-Max V ABS 300i H2O 4T E5 2023->
Additional products