Cylinder Kit MALOSSI MHR Replica Ø40 Pin Ø10 Minarelli Horizontal H2O
Article information
CYLINDER
- Material: special aluminum alloy with a high content of silicon and titanium, guaranteeing an exceptional tensile strength even at high temperatures.
- Heat treatment: special cooling and stabilizing treatment gives the material a high strength and toughness and to ensure that the size and mechanical specifications remain unchanged at temperatures up to 250 ° C.
- Chip-making process shall be carried out on NC machining with extremely limited tolerance size and shape (roundness, squareness).
- Inside surface layer: made by using silicon carbide in a nickel matrix with a heat treatment extreme hardness (about 600 HV0, 1 / 5) and excellent wear resistance.
- Internal machining of the cylinder: using special machines that a certain degree of finish of the cylinder wall roughness corresponds to the angles in the design (special grinding process using stone) as possible.
- Intake and exhaust diagrams: Developed and manufactured specifically for racing. The definition of the inlet and exhaust diagrams have a significant effort from our engineers, both on engine test stands and the track where the trophy is held.
PISTON
- Material: special aluminium alloy with a very high percentage of silicon and titanium that guarantees both excellent heat resistance and strain strength upon temperature variation.
- External coating: graphite coating that guarantees a very low friction coefficient
- Structure: reinforced in order to offer resistance to the stress suffered by cylinder units used for top-level competition, but at the same time light enough to reduce inertial force.
- Ring: 1 mm nodular-cast-iron single ring with rectangular cross section and hard-chromium coating on outer surface.
PISTON RINGS
- Rings in very strong modular cast iron with ground, wear-resistant, hard chrome metal-spray coating on the contact surface.
HEAD
- Material: special alluminium alloy with a very high heat exchange coefficient.
- Geometry of heat exchange surfaces recalculated and increased.
- Combustion chamber completely-designed to obtain a high compression ratio (15.8:1) with a very high turbolece.
- Machining: numerically controlled machines.
Specifications
Part number Malossi | : | 318559 |
Bore | : | Ø40mm |
Stroke | : | 39,2mm |
Engine displacement | : | 49,3cc |
Material | : | Aluminium |
Class | : | SP |
Including cilinder head | : | Yes |
Bore category | : | Standard |
Piston pin | : | Ø10mm |
Cooling | : | Water cooled |
Fits
Cylinder Kit MALOSSI MHR Replica Ø40 Pin Ø10 Minarelli Horizontal H2O fits the following vehicles:- Aprilia Area 51 50 H2O 2T E1 1998-2000
- Aprilia Gulliver 50 H2O 2T 1996-1998
- Aprilia Rally 50 H2O 2T 1996-1999
- Aprilia Sonic 50 H2O 2T E1 1998-2003
- Aprilia Sonic 50 H2O 2T E2 2004-2008
- Aprilia SR 50 Racing H2O 2T 1997-2000 (Minarelli)
- Aprilia SR 50 Replica H2O 2T 1994-1996 (Minarelli)
- Aprilia SR 50 Sport H2O 2T 1997-2000 (Minarelli)
- Benelli 491 50 Racing H2O 2T 1998-2001
- Benelli 491 50 RR H2O 2T E1 1999-2003
- Benelli 491 50 Sport H2O 2T 1997-2001
- Benelli K2 50 H2O 2T 1998-2001
- Beta ARK 50 H2O 2T 1997-1998
- Beta ARK 50 H2O 2T E1 1999-2001
- Beta ARK 50 H2O 2T E2 2002-2006
- Beta ARK 50 X-Type H2O 2T E2 2003-2005
- Beta Eikon 50 H2O 2T E1 1998-2002
- Beta Eikon 50 H2O 2T E2 2003-2005
- Beta Eikon 50 Team H2O 2T E2 2006-2007
- Italjet Dragster 50 H2O 2T E1 1998-2002
- KTM ARK 50 H2O 2T 1997-1998
- Malaguti F12 50 Phantom H2O 2T 1994-1998
- Malaguti F12 50 Phantom H2O 2T E1 1999-2002
- Malaguti F12 50 Phantom H2O 2T E2 2003-2006
- Malaguti F12 50 Phantom R H2O 2T E2 2007-2012
- Malaguti F15 50 Firefox H2O 2T 1996-1998
- Malaguti F15 50 Firefox H2O 2T E1 1999-2002
- Malaguti F15 50 Firefox H2O 2T E2 2003-2006
- MBK Mach G 50 H2O 2T E2 2002-2015
- MBK Nitro 50 H2O 2T 1997-1998
- MBK Nitro 50 H2O 2T E1 1999-2001
- MBK Nitro 50 H2O 2T E2 2002-2012
- MBK Nitro F1 50 H2O 2T E1 1999-2001
- MBK Nitro F1 50 H2O 2T E2 2002-2004
- MBK Nitro II 50 H2O 2T E2 2013-2016
- MBK Nitro Naked 50 H2O 2T E2 2005-2012
- MBK Nitro Naked II 50 H2O 2T E2 2013-2016
- Renault Campus 50 H2O 2T 2002-2003
- Renault F1 50 H2O 2T 2001-2003
- Rieju First 50 H2O 2T 1995-1999
- Rieju RS 50 Sport H2O 2T E2 2014-2016
- Rieju RS 50 Urban AIR 2T E2 2014-2016
- Yamaha Aerox 50 H2O 2T 1997-1998
- Yamaha Aerox 50 H2O 2T E1 1999-2001
- Yamaha Aerox 50 H2O 2T E2 2002-2012
- Yamaha Aerox II 50 H2O 2T E2 2013-2016
- Yamaha Aerox Naked II 50 H2O 2T E2 2013-2016
- Yamaha Aerox SP 50 H2O 2T E1 1999-2001
- Yamaha Aerox SP 50 H2O 2T E2 2002-2012
- Yamaha Jog RR 50 H2O 2T E2 2002-2015
Documentation
73_6901.pdf
Additional products
Recommended products
Spare parts