Cylinder Kit Ø52 PIAGGIO IGET 125 I.E H2O 4T 4V E4 (without gaskets)
Article information
Standard genuine cylinder kit for Piaggio IGET 125 I.E H2O 4T 4V E4 engines.
This cylinder is supplied with a complete piston but without gaskets.
Specifications
| Bore | : | Ø52mm |
| Stroke | : | 58,7mm |
| Compression ratio | : | 12,0 ± 0,5:1 |
| Engine displacement | : | 124,7cc |
| MAXIMUM POWER (HP/RPM) | : | 9,0hp / 8250rpm |
| Material | : | Cast iron |
| Class | : | Standard |
| Including cilinder head | : | No |
| Bore category | : | Standard |
| Piston pin | : | Ø14mm |
| Cooling | : | Water cooled |
Fits
Cylinder Kit Ø52 PIAGGIO IGET 125 I.E H2O 4T 4V E4 (without gaskets) fits the following vehicles:- Piaggio Medley 125i IGET H2O 4T 4V E4 2016-2019 (RP8MA0120 / RP8MA0121 / RP8MA100 / RP8MA0120 / RP8MA0111 / RP8MA0110)
- Piaggio Medley 125i IGET H2O 4T 4V E5 2021-> (RP8MD0100)
- Piaggio Medley Sport 125i IGET H2O 4T 4V E4 2016-2019 (RP8MA0120 / RP8MA0121 / RP8MA100 / RP8MA0120 / RP8MA0111 / RP8MA0110)
- Piaggio Medley Sport 125i IGET H2O 4T 4V E5 2021-> (RP8MD0100)
- Piaggio Medley Start&Stop 125i IGET H2O 4T 4V E4 2020 (RP8MB0100 / RP8MA0120 / RP8MA0131)
- Vespa GTS ABS 125i IGET H2O 4T 4V E4 2016-2018 (ZAPMA3100 / ZAPMA3200 / RP8M45510 / RP8M45820 / RP8M45511)
- Vespa GTS ABS 125i IGET H2O 4T 4V E4 2019-2020 (ZAPMA3700)
- Vespa GTS ABS 125i IGET H2O 4T 4V E5 2021-09/2022 (ZAPMD3200)
- Vespa GTS Super ABS 125i IGET H2O 4T 4V E4 2016-2020 (ZAPMA3700)
- Vespa GTS Super ABS 125i IGET H2O 4T 4V E5 2021-09/2022 (ZAPMD3200 / ZAPMD3201)
Additional products
Recommended products
|
No recommended products were found. |
Spare parts
