Cylinder MALOSSI 4-Stroke Ø67 Pin Ø15 Derbi GPR 125 H2O 4T
Article information
DESCRIPTION
Technical features
Cylinder:
125 cc:
Bore: Ø 67 mm
Stroke: 47 mm
Displacement: 166cc
200 cc:
Bore: Ø 67 mm
Stroke: 58 mm
Displacement: 200cc
Compression ratio: 12:1
Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
Machining: on machine tools with high precision numerical control.
Cylinder-piston connection with an allowance of 0.05 mm.
Recalculated and upgraded heat exchange surfaces.
Piston:
Ultra compact with 3 rings.
Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
Machining on machine tools with numerical control.
Lightened and reinforced.
Upgraded heat exchange surfaces.
Piston rings:
Special rings with high sliding ease and very high mechanical resistance.
I° ring compression in nitrided and chromium steel.
II° special cast iron ring.
Three - piece scraper ring made of chromium-plated special steel alloy.
To be installed exclusively with Force Master 2.1 control unit 5519412 on:
-APRILIA SRS 125 ie 4T LC euro 5 2021->
-APRILIA RS GP Replica 125 ie 4T LC euro 5 2021->
-APRILIA RX 125 ie 4T LC euro 5 2021->
-APRILIA SX 125 ie 4T LC euro 5 2021-> (M546M)
-APRILIA TUONO 125 ie 4T LC euro 5 2021->
To be installed exclusively with Force Master 2.1 control unit 5519542 on:
-APRILIA RS4 125 ie 4T LC euro 3
-APRILIA SRS 125 ie 4T LC euro 4 2019->2020 (M545M)
-APRILIA RS GP Replica 125 ie 4T LC 4 2019->2020
-APRILIA RX 125 ie 4T LC euro 4 2019->2020
-APRILIASX 125 ie 4T LC euro 4 2018->2020 (M546M)
-APRILIA TUONO 125 ie 4T LC euro 4 2019->2020)
-DERBI Senda DRD 4V R - SM 125 ie 4T LC euro 3
To be installed exclusively with Force Master 2.1 control unit 5519437 on:
-ITALJET DRAGSTER 125 4T LC euro 5 2021-> (JC1P 58 MI-3)
To be installed exclusively with Force Master 2.1 control unit 5519720 on:
-ITALJET DRAGSTER 200 4T LC euro 5 2021-> (JC1P63ML-4B)
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Specifications
Part number Malossi | : | 3115326 |
Bore | : | Ø67mm |
Stroke | : | 47mm / 58mm |
Engine displacement | : | 166cc / 200cc |
Material | : | Aluminium |
Class | : | Sport |
Including cilinder head | : | No |
Bore category | : | Tuning |
Piston pin | : | Ø15mm |
Cooling | : | Water cooled |
Fits
Cylinder MALOSSI 4-Stroke Ø67 Pin Ø15 Derbi GPR 125 H2O 4T fits the following vehicles:- Aprilia RS4 125i H2O 4T E3 2011-2013 (Piaggio)
- Aprilia RS4 125i H2O 4T E3 2014-2016 (Piaggio)
- Aprilia RS4 125i H2O 4T E4 2017-2020 (Piaggio)
- Aprilia RS4 125i H2O 4T E5 2021-> (Piaggio)
- Aprilia RX 125i Enduro H2O 4T E4 2018-2020 (Piaggio)
- Aprilia RX 125i Enduro H2O 4T E5 2021-> (Piaggio)
- Aprilia SX 125i SM H2O 4T E4 2018-2020 (Piaggio)
- Aprilia SX 125i SM H2O 4T E5 2021-> (Piaggio)
- Aprilia Tuono 125i H2O 4T E4 2017-2020 (Piaggio)
- Aprilia Tuono 125i H2O 4T E5 2021-> (Piaggio)
- Derbi GPR 125 R H2O 4T E3 2009-2011 (Piaggio)
- Derbi Mulhacén 125 Café H2O 4T E3 2008 (Piaggio)
- Derbi Mulhacén 125 H2O 4T E3 2007-2010 (Piaggio)
- Derbi Senda R 125 DRD H2O 4T E3 2009-2011 (Piaggio)
- Derbi Senda SM 125 DRD H2O 4T E3 2009-2013 (Piaggio)
- Derbi Terra 125 Adventure H2O 4T E3 2008-2011 (Piaggio)
- Derbi Terra 125 H2O 4T E3 2007-2011 (Piaggio)
- Italjet Dragster 125i H2O 4T E5 2020->
- Italjet Dragster 200i H2O 4T E5 2020->
- Scomadi TT 200i H2O 4T E4 2019-2021
Documentation
7315325_(1).pdf
Additional products
Recommended products
Spare parts