Cylinder MALOSSI I-Tech Ø61 pin Ø14 Honda PCX/SH 150i H2O 4T 2013-2019
Article information
Complete cylinder I-TECH 4 STROKE
Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
Machining: on machine tools with high precision numerical control.
Cylinder-piston connection with an allowance of 0.05 mm.
Recalculated and upgraded heat exchange surfaces.
CDI Force Master:
Force Master is the innovative CDI which allows to change the injection in order to fit perfectly the Malossi 4-stroke cylinder kit. This CDI has been scheduled with different maps so as to be coupled perfectly with your vehicle whatever its setting is!
Carburation adjusting
± 6% at min/medium/max
RPM limiter : + 1000 RPM
4 different maps
Piston:
Ultra compact with 3 rings.
Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
Machining on machine tools with numerical control.
Lightened and reinforced.
Upgraded heat exchange surfaces.
Piston rings:
Special rings with high sliding ease and very high mechanical resistance.
I° ring compression in nitrided and chromium steel.
II° special cast iron ring.
Three piece scraper ring made of chromiumplated special steel alloy.
Specifications
Part number Malossi | : | 3117560 |
Bore | : | Ø61mm |
Stroke | : | 57,9mm |
Compression ratio | : | 11,4:1 |
Engine displacement | : | 169,2cc |
Material | : | Aluminium |
Class | : | Sport |
Including cilinder head | : | No |
Bore category | : | Tuning |
Piston pin | : | Ø14mm |
Cooling | : | Water cooled |
Fits
Cylinder MALOSSI I-Tech Ø61 pin Ø14 Honda PCX/SH 150i H2O 4T 2013-2019 fits the following vehicles:Documentation
7317559.pdf
Spare parts