Shock absorber MALOSSI RS24/10-R L.350mm Kymco AK 550i E4 2017->
Article information
Technical features
- Type: oil pressure shock with split reservoir.
- Use: scooter for the competition
- shock absorber rod Ø 14 mm in 38 NiCrMo4UNI 7845 steel hardened and tempered with a 25-30 micron hard chrome layer (mm) (surface hardness of the untreated HRC 55/60)
- Piston Ø 36 mm with two independent laminar packages (one in compression, one in expansion)
- New laminar system in music steel for extremely accurate calibration
- Piston guide shoe LUBRIFLON PTFEB 70 (modified bronze mixture)
Sliding on the DU GUIDE connection (gluing by sintering a layer of spheroid bronze on a band of suitably shaped low carbon steel followed by impregnation and coating with a PT-FE + FB mixture)
- SEALTHANE 9345 polyester resin scraper ring
- Micrometric control of spring preload through ring nuts
- Adjustment of hydraulic braking in expansion to around 24 positions
- Dual setting of hydraulic braking in compression, each selected in approximately 10 positions, separated by low and high speed
- Special oil with low viscosity, virtually unaffected by temperature fluctuations
- External expansion tank, whereby the amount of internal liquids can be increased. Taking into account the technical characteristics described above, you can see that these special shock absorbers are the best technological expression available to the public today
- Wheel base setting of 25 mm (only for rear shock absorbers)
- Wheelbase: rear 321 + 25 mm - front 181 mm
- Stroke: rear 62 mm - front 45 mm
Specifications
Part number Malossi | : | 4618047B |
Class | : | Race |
Type | : | Rear shock absorber |
Damping | : | Gas (external reservoir) / hydraulic |
Fits
Shock absorber MALOSSI RS24/10-R L.350mm Kymco AK 550i E4 2017-> fits the following vehicles: